Contact us

Suzhou Pullwin Auto Technology Co.,Ltd

Building 3, Meijite Industrial Product Expo Center No.1055, East Jinyang Road, Lujia Town Kunshan City

Wendy

0086-159-5093-1259

pullwin@pullwinsz.com

Electrostatic Dust Meter

This device confirms the online emission amount (mg/sec) or concentration (mg/m³) of dust particles by sensing and monitoring the charge induction generated by the dust particles flowing around the probe, thereby realizing real-time online monitoring of dust concentration.

Features

 

☆ Adopt mixed signal processing method, strong anti-interference ability

☆ Easy to use  The dust contamination of the probe do not affect the measurement sensitivity,

☆ By intelligent successive approximation algorithm, it can adapt to more working conditions

 

Principle

        Charge transfer occurs when two objects rub or touch.The device adopts accurate and reliable AC electrostatic measurement technology.When the dust particles pass through the sensor, the weak charges carried by the dust particles are collected by the sensor and sent to the processor. The processor converts the signal processing result into an output value that is linearly related to the dust content.

ModelPW-ESDM series
Operate temperature range-20~60℃
Operate humidity range No condensation of 90%
Operate vibration environmentMaximum continuous oscillation, any direction, any frequency: ROOT mean square value 2g (20m/s²)
Operate electromagnetic fieldMaximum: 60A/m at 50 Hz (equivalent to a 50AT magnetic field in a 1m x 1m square solenoids)
Operate environment protectionIP66/NEMA4 aluminum alloy housing, suitable for installation in non-corrosive environment, stainless steel probe
Pipeline gas pressure-0.1~1MPa
Pipeline gas flow rate1m/s~30m/s
Pipeline gas temperature-50~450℃
Pipe outer diameter0.1~4m
Probe structureStandard probe is M6, 160 mm long, 316 stainless steel rod.
Dust particle rangeNominal 0.1μM ~ 200μM ( Particles exceed nominal range can be received but the signal characteristics are different )
Time zero driftLess than 1% per year.
Temperature zero driftLess than 1% over the specified temperature range
Time full scale drift Less than 1% per year.
Temperature full scale drift Less than 1% over the specified temperature range
Line stabilityAll parts of the system are made of high-stability electronic assemblies
Noise resistanceAll 50/60 Hz audio & harmonics are filtered out before signal is received
Measure range0-9/12/25/50/100/200/400/800/1000 mg/M³
Transmitter output modeTwo-wire 4 – 20mA (built-in isolator, explosion-proof & anti-interference)
Transmitter power15V – 32VDC

小Electrostatic-dust-meter.pdf